Standard 6x10 utility trailer converted into a nice little camper/sleeping unit. A window was added to each side and an A/C unit on the front with electricity being supplied with an extension cord thru a r/v receptacle in the front of the trailer that fed a breaker box on the inside.
Swing out the back door and pull out the "slide-out".
You enter from the two swing out doors in the rear slide out. The white box contains a small 120 volt mini kitchen and used as a step to enter the camper doors.
This is a view from the rear. This unit was used by a couple and their pre-teen son. They were always outside cooking, walking, hiking, or riding bicycles and just used the camper for sleeping.
7 comments:
What a cool rig! You need to post a link on the forum (or with your permission, i will)
Hi Judy!
Cyndi,
Link away if you like.
Brilliant! I used to joke about turning a utlity trailer into a camper--maybe I should revisit that idea!
It looks like the slide out gives at least 5 1/2 by 5 1/2 feet addition. I am curious how you made it and the sliders used. I would like to extend my 7 by 16 trailer...using the ramp as the floor.
Standard 6x10 utility trailer converted into a nice little camper/sleeping unit. A window was added to each side and an A/C unit on the front with ... uutilitytrailer.blogspot.com
I wonder exactly how the slide out works?
I had been planning doing this with the rest slide out of a pop up I'm turning it to a hard side . I left front as it was as a bed but hard side and tool area instead of sleeping . And the rear I am putting rear ramp , instead of wasting tracks since opening to the floor anyway figured idea make a full length slide with ramp. Will probably make a guide more than a slow just to help the bottoms tracks .
Post a Comment